We are excited to announce HydroDrop. We’ve taken new technology and combined it with old school trusted hydraulic systems.
Our product does not replace existing panel or tethered boxed switches. Instead, our system allows additional coolness to your classic by providing wireless remote control from outside your ride at a distance.
We like to say, "It's an addition to tradition".
Key features
REMOTE SPECIFIC FEATURES
Buttons: 7-button control, supporting a variety of pump/dump configurations.
Buttons: Two auxiliary buttons used in the pairing process and selecting button LED color
Front & Rear pump protection (750ms max hold, then cuts off)
Continuous dump (down control)
Quick button reaction (can be used for Hoppers)
FCC Federal Communications Commission Certified
Uses 128 AES Encryption data transfer
Battery: 410 mAh Li-Ion battery, rechargeable over USB Micro connector
Battery Life: >10 hours continuous use (typical use), >60 days inactive
Battery Charge Time: <5 hours from fully discharged to fully charged
Battery Charge Source: Any USB charger, 5V 500mA capable (not included)
Housing: ABS Plastic enclosure (Black)
Cover: Silicone rubber cover (Black, White, Light Gray, Green, Yellow, Cyan, Pink) Silicon Rubber
Operating Temperature: -20 to +60°C
Battery Charging Temperature: +10 to +45°C
Backlight: Blue LED back light (can go tri-color Red, Green, Blue for production units, settable using AUX2 button)
Battery Charging Temperature: +10 to +45°C
Special Features: Location to attach a wrist or neck strap
Key features
BASE STATION SPECIFIC FEATURES
Power: 24 VDC (+/- 3.0VDC)
Idle Current Draw: <15mA
Solenoids: Up to 10A per Solenoid, 30A per output channel (using Power Module Cable Assembly)
FCC Federal Communications Commission Certified
Uses 128 AES Encryption data transfer
Panel or Box Switches: Fully compatible, pass through function
Connection to Hydraulic I/O's: 10-pin removeable screw terminal Connection to Wire Hand-Held Controller: 9-pin removeable screw terminal
Wire Size: 16-30 AWG
Housing: ABS Plastic enclosure (Black) Mounting: Two flanges for screws, Velcro Local Control: 1x Rocker Switch for Front UP/DOWN control, 1x Rocker Switch for Rear UP/DOWN control (2x Rocker switches total)
Status LED: 1x Green LED for status
Pairing: 1x Momentary Push Button to Initiate Pairing Sequence accessed through pin hole in lid. Pairing is to a single Remote-Control device
Operating Temperature: -10 to +60°C
Note *** ADEX/ADEL style dumps require a 2nd Power Module Cable to handle the higher current. Standard Delta Square dumps do not require a 2nd Power Module Cable.
Disclaimer
TX2RX Automotive Wireless Solutions, LLC is an independent business selling aftermarket products for the Lowrider and Air Ride community. All products on this website are intended and sold for aftermarket use only.
The installation of any aftermarket part may void or otherwise adversely affect your factory warranty. In addition, such installation and use may violate certain federal, state and local laws, rules and ordinances as well as other laws when used on motor vehicles operated on public highways. Always check federal, state, and local laws before modifying your vehicle. It is the sole and exclusive responsibility of the user to determine the suitability of the product for his or her use, and the user shall assume all legal, personal injury risk, and liability and all other obligations, duties and risks associated therewith.
Vehicles equipped with hydraulic and/or Air Ride suspensions can be dangerous. TX2RX Automotive Wireless Solutions, LLC has no control over the usage of our products. TX2RX Automotive Wireless Solutions, LLC expects their customers to exercise good judgment as to the proper selection, installation, use and maintenance of our products. TX2RX Automotive Wireless Solutions, LLC assumes no responsibility for damage or injury of any kind because of the misuse or improper application of any part in any way by any person. TX2RX Automotive Wireless Solutions, LLC shall not be liable for any indirect or consequential damages whatsoever.
All matters shall be interpreted under California law. All products distributed by TX2RX Automotive Wireless Solutions is guaranteed against defects in material and workmanship only. Final decision will be made in a just and prompt manner. Replacement will be limited to parts only and does not include labor claims of any type.